CTD Package Configuration

This page lists the sensors assigned to (installed on) CTD packages.

Note: The SeaBird SeaSave software must be configured to use the same instruments as listed below. SeaSave is the primary data acquisition software for CTD data. The CTD data provided by CORIOLIX are real-time data from SeaSave.

#	CTD ID	Sensor ID	Sensor Name	Sensor Model	Serial Number	Enabled
1	sbectd001133	altime302492	Altimeter PA-200_302492	Tritech PA-200 Altimeter	302492	True
2	sbectd001133	conduc000367	Conductivity SBE 04_0367	Sea-Bird SBE 4C conductivity sensor	0367	True
3	sbectd001133	conduc004791	Conductivity SBE 04_4791	Sea-Bird SBE 4C conductivity sensor	4791	True
4	sbectd001133	ctpump052399	Pump SBE 5T_2399		52399	True
5	sbectd001133	ctpump053197	Pump SBE 5T_3197		53197	True
6	sbectd001133	fluoro003090	Fluorometer FLRTD_3090	WET Labs {Sea-Bird WETLabs} ECO FL(RT) fluorometer	3090	True
7	sbectd001133	fluoro006977	Fluorometer ECO-Triplet_6977	WET Labs {Sea-Bird WETLabs} ECO Triplet BBFL2 scattering fluorescence sensor	BBFL2-6977	True
8	sbectd001133	oxygen004625	Oxygen SBE 43_4625	Sea-Bird SBE 43 Dissolved Oxygen Sensor	4625	True
9	sbectd001133	oxygen004640	Oxygen SBE 43_4640	Sea-Bird SBE 43 Dissolved Oxygen Sensor	4640	True
10	sbectd001133	ph001401	pH SBE 18_1401	Sea-Bird SBE 18 pH Sensor	1401	True
11	sbectd001133	radiom70777	PAR QSP-2300_70777	Biospherical Instruments PAR sensor (unspecified model)	70777	True
12	sbectd001133	sbectd001365	CTD SBE 9P_1365	Sea-Bird SBE 9plus CTD	09-1365-142850	True
13	sbectd001133	sbectd001365	CTD SBE 9P_1365	Sea-Bird SBE 9plus CTD	09-1365-142850	True
14	sbectd001133	thermo02708	Temperature SBE 03F-1_2708	Sea-Bird SBE 3F temperature sensor	2708	True
15	sbectd001133	thermo06310	Temperature SBE 03F_6310	Sea-Bird SBE 3F temperature sensor	6310	True
16	sbectd001133	transm001681	Transmissometer C-Star_1681DR	WET Labs {Sea-Bird WETLabs} C-Star transmissometer	CST-1681DR	True